Nhện Redback (nhện lưng đỏ) – mô hình in 3D trang trí Halloween

Print this "cute" australian redback spider. This is a great item for Halloween.

The spider body is 4.2 cm (1.65 inches) wide and with head 7.0 cm (2.76 inches) high. It is an easy print.

Print the body, the red back and the 2 eyes and glue everything together.

List of items to print:

Redback spider V1.stl

Print this item once in black color.

Redback spider red back V1.stl

Print this item once in red color.

Redback spider eye V1.stl

Print this item twice in white color.

The head of the spider is hollow at the bottom and has a utility to fix a string in order to let the spider sit on your wall.

Enjoy printing this object.

Print Settings

Printer:

FLSUN Super Racer

Rafts:

No

Supports:

No

Resolution:

0.2 mm initial layer, 0.2 mm layer height

Infill:

20 %

Filament:

VERBATIM PLA

Black, red and white

Notes:

Be careful when removing the spider from the printbed. Let the printbed cool down completely and use Isopropanol, if required. The legs are a bit delicate.

Post-Printing =============

Spider assembly part 1

Put some glue at the flat side of the red back.

Spider assembly part 2

Insert the red back into the spider's body.

Spider assembly part 3

Please note that there are 2 insets at the head to hold the eyes. Put some glue into the insets and glue the flat side of each eye into it.

Spider assembly part 4

With the eyes inserted the assembly is complete.

How I Designed This ===================

The redback spider was designed with Blender.

Category: Animals