HSW bling (insert vase mode) cho Honeycomb Storage Wall

Remix of Tường lưu trữ Honeycomb By RostaP

By SolarSailor

Downloads: 167
Likes: 61
Views: 1,071
Remixes: 0
Comments: 0

Download all (.zip)· 3 files · 174.4 KB· 174.4 KB

Files 3 174.4 KB

insert_vase_1777816869.stlSTL · 98.7 KB
insert_vase_1777816871.3mf3MF · 27.9 KB
insert_vase_x4_1777816872.3mf3MF · 47.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #373012
Category: Mỹ Thuật
Published: 05/03/2026
License: Creative Commons — Attribution — Noncommercial
Tags: vasemode
hexagon
honeycombstoragewall
hsw
honeycombwall
hcw
bling

Show more tags Show fewer tags

Description

Honeycomb storage wall bling, is that even a thing?! It is now! Coming in at only 1.7g of filament and 8min print time and promising a satisfying yet easy print, this vase mode honeycomb wall insert is painless to print and really fun to play with!

There two really important print configurations to get this working:

Print in vase mode
Set number of bottom layers to a number that results in a 2.4mm bottom shell (i.e. 12 layers for 0.2mm layer height)

I printed these with PLA+ (Fusion Filaments HTPLA+, to be exact) with a 0.4mm nozzle (0.45mm extrusion width - default for PrusaSlicer) and 0.2mm layer height. The resulting inserts have a nice snap feel, minimal wiggle, are easy to pop out, and have withstood multiple reconfigurations.

Works great with PLA also!

Please post your experience with other filaments and configurations!