Bộ sưu tập Gridfinity cups cao 8 (60mm)

Collection of Gridfinity basic cups height 8 (60mm), over 2500 STLs all common variations.

Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).  

This will hopefully allow people to grab the size and config you need without needing generate it yourself. The OpenSCAD script is really flexible and all configurations can't be included here. If what you need is not here please make a suggestion, or check the OpenSCAD script.

Options that have been included:

• Height: 8 (56mm+4mm)
• Widths: [0.5, 1, 2, 3, 4, 5, 6]
• Depths: [1, 2, 3, 4, 5, 6]
• Chambers: [1 - 6]
  • Width * 2 up to 6, min width of 0.5 (21mm)
• Label: [off, on, left, right, center]
  • Left and Right for 1 chamber, Center for 1 and 2 chambers.
• Fingerslide: [on, off]
• HalfPitch: [on, off]
• EfficientFloor
  • Fingerslide and HalfPitch off, MagnetDiameter and ScrewDepth =0
• MagnetDiameter = 6.5
• ScrewDepth = 6

In total that results in 2580 different models per height.

There are a lot of individual models/STL's to make it more manageable, they have been split in to separate posts for each height. This one is for a height of 8 (56mm).

There are too many STLs to attach directly so they are batched added in zip files.

Other Heights:

• Height 2 (14mm)
• Height 3 (21mm)
• Height 4 (28mm)
• Height 5 (35mm)
• Height 6 (42mm)
• Height 7 (49mm)
• Height 8 (56mm)
• Height 9 (63mm)
• Height 10 (70mm)
• Height 11 (77mm)

These bins were generated using the OpenSCAD model maintained by Jamie. 
If you use these please go show Jamie some love. Link to model on Printables