Kệ Treo Tường Ẩn Vít Cho Mini Warehouse

If you have no place on your desk, place the Mini Warehouse on a shelf with hidden mounting system on a wall.

The shelf contains 2 slots so the warehouse is firmly placed on the shelf.

For boring holes in a wall, a drilling jig is added. (same length as a shelf part).

Advise is to mount the 3 shelf parts first with the 4 hexagon dowel pins. (you can glue them for a tight fit).

Mounting can be done with 3,5 - 4mm sunken screws.

When mounting the Wall Ankers make sure the clamping side is under!

Tip: to print the Wall Ankers stronger, print them flat as positioned in the STL and use at least 3-4 perimeters and >25% infill.

p.s. It's not meant for great loads, but since most people use the warehouse to store not that heavy stuff for most it will do.