HSW Air Purifier - Bộ lọc không khí gắn tường HSW

Remix of Tường lưu trữ Honeycomb By RostaP

By nikwalters_1082586

Downloads: 107
Likes: 61
Views: 1,694
Remixes: 0
Comments: 0

Download all (.zip)· 4 files · 5.6 MB· 5.6 MB

Files 4 5.6 MB

air_purifier_mount_hsw_1777798886.stlSTL · 280.5 KB
Grill_2_1777798888.stlSTL · 571.4 KB
Fan_Gaurd_1777798889.stlSTL · 875.8 KB
End_Cap_1777798890.stlSTL · 3.9 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #372057
Category: Máy In 3D
Published: 05/03/2026
License: Creative Commons — Attribution — Noncommercial
Tags: honeycombstoragewall
hsw

Description

I need an air purifier for my small office so I remixed this to mount to my HSW wall. This model uses a 120mm computer fan and 4 4mm screws with nuts and washers.

Amazon has various very cheap 120mm fans that you can use. You will just need a 12v power supply or a buck converter 24v to 12v and you can run it off your printer.

This was made for a 3.75" hepa filter, but I had a bunch of active charcoal filter so I cut it to fit inside. This is the filter it was designed for but there are many that will work including some auto filters - https://a.co/d/9ZXaNeN

I printed at 20% infill 3 walls 4 bottom layers 4 top layers with PLA+ no supports needed except on the HSW mounts on mounting plate.