
Bộ Part Nâng Cấp cho Prusa i3 MK3/S/+
Remix of Các bộ phận in được cho i3 MK3S+ By F3D Team
- Downloads
- 270
- Likes
- 42
- Views
- 2,766
- Remixes
- 0
- Comments
- 0
Files 8 1.5 MB
- y-belt-idler_Beefy_TNM_1777822532.3mf3MF · 107.6 KB
- z-axis-bottom_Beefy_TNM_1777822533.3mf3MF · 178.5 KB
- z-axis-top_Better_TNM_1777822534.3mf3MF · 196.1 KB
- y-motor-holder_Beefy-Stiffer_TNM_1777822535.3mf3MF · 118.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #371699
- Category
- Máy In 3D
- Published
- License
- GNU General Public License v2.0
Description
These parts are meant to allow you to print faster with higher accelerations reliably. They stiffen parts of the printer that I found to be less stiff than I wanted.
Link to MK3S+ Assembly Guide (Should be the same for MK3S and MK3)
DISCLAIMER: I can't recommend supporting the lead screw with a bearing if your lead screw wobbles when the z-axis goes up and down. If it wobbles do not do the z-axis top mod. My lead screws do not wobble and I have found that this improved rigidity and print quality quite noticeably. Thanks to @Robert_256299 for reminding me about this issue.
Z Axis Top:
This part adds a bearing to support the lead screw. This part is also the only upgrade that needs extra parts.
Parts Needed:
- 2x 608 Bearing
- 4x M3x18 Button Head
Replace bolts pointed out in pink with button-head versions so the bolt heads don't collide with the bearings.
Make sure to insert the bearing so it is flush with the top surface.
Example:
Mount like the original
Z Axis Bottom:
Mount it exactly like the original. Since there are no R/L markings on the parts just make sure the smooth rod holes are on the outside.
Y Motor Holder:
Mount it exactly like the original.
Y Belt Idler:
Mount it exactly like the original.
Print spec
- Formats
- 3mfstep
- Model files
- 8
- Total size
- 1.5 MB
- Largest file
- 358.3 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-
New -
New -

-
New -

-

-


