
Máy In 3D
Perfect First Layer Test – Bài test cân chỉnh lớp đầu tiên
- Downloads
- 2,503
- Likes
- 75
- Views
- 4,996
- Remixes
- 0
- Comments
- 0
Files 1 3 KB
- Perfect_First_Layer_Test_1777788183.stlSTL · 3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #371439
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Public Domain
Description
This is a first layer calibration test for any printer. It consists of 5 identical tiles.
Recommended print settings
- layer height: 0.2 mm
- fill angle: 0°
- perimeters: 2
- skirt: 0
- first layer speed: 25 mm/s
It should be centered on the bed and stretched as close to the edges as possible (exactly like this in the right picture).
Live adjust Z while printing, if necessary.
Interpreting results
Each square should look the same. Surface of the prints should be smooth and pleasant to the touch (just like the one in the left picture).
The tiles should be very difficult to tear apart.
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 3 KB
- Largest file
- 3 KB












