Mặt trước cho Uno Box (không cần MMU)

I really like the multicolored UNO Box by Irawans but I don't have an MMU. That's why I designed the front face that uses print pauses and color changes on different layers to achieve similar effect.

To print the face multicolored you need to set-up pauses and switch filament colors accordingly. Print:

• 5 red layers,
• 2 black layers,
• 2 white layers,
• 2 yellow layers.

To assemble it print Uno Box - Lid.stl and Uno - WhiteFrame.stl together (those are symmetrical so both on X:0, Y:0 face down) with supports in place of front face. The face should snap perfectly in place - if not you may need to use some deburring tool. After fitting I snapped it together with a super glue.

I used PETG but other materials should work well as well.

Note: Consider enabling “Monotonic Infill” on top layer to avoid unequal shading like on my print.