Skip to main content
F3D
Finger Slinger – Fidget quay Print-in-Place… 1

5 images

Đồ Chơi Khác

Finger Slinger – Fidget quay Print-in-Place (Spinning Fidget)

By LinkDesigns

Downloads
13,944
Likes
2,657
Views
55,226

Files 5 8.3 MB

  • Finger_Slinger_1777789338.stlSTL · 1.4 MB
  • Weight_1777789339.stlSTL · 960.6 KB
  • Finger_Slinger_reduced_air_gap_1777789340.stlSTL · 1.5 MB
  • Finger_Slinger_1777789341.stepSTEP · 708.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Design

This fidget has similar characteristics to a butterfly knife, but in a simple, smooth, and forgiving package. It's designed to print in place with zero supports, and has two weight options depending on how “slingey” you want it to be. 

Printing

Resolution: .2mm

Walls/Perimeters: 3-4

Infill: 20%

Supports: nope

Weights

Some weight is required to give the Finger Slinger momentum, so there are two options. 

  1. Printed Weight: A cool looking insert that provides great balance and agility. (print at 100% infill) 

  2. Skateboard Bearing: For insane performance and crazy speed, a 22x7x8mm bearing can be used. 

Freeing the Fidget

To break the model loose, follow these steps: 

*don't be afraid to use a bit of force

First, give it a slight bend until the arms pop away from each other:

Then push the top arm out to free the bearing:

Notes

Both weight options should press fit nicely into the top arm, but a little glue isn't a bad idea if they seem loose. 

Scaling: My hands are on the bigger side, so the fidget may be a little large for some people. If you need to scale it up or down, +/- 20% is the threshold before tolerances get messy. 

I'd love to hear feedback on this design and continue developing it, so let me know what you think!

Read more Show less

Print spec

Formats
gcodestepstl
Model files
5
Total size
8.3 MB
Largest file
3.8 MB

0 comments

See all