Đèn gắn tường Stylish Wall Lamp in 3D

3D printed Wall mounted lamp. 

I plan to model more of the top mounts so everybody can have what he/she/it likes.

This model uses E27 socket with switch and plug: https://www.amazon.de/-/cs/gp/product/B0967G5RHR/ref=ppx_yo_dt_b_asin_image_o00_s01?ie=UTF8&th=1 

+ E27 light source. Just have in mind that the body is plastic, so choose one that produce as less heat as possible. In my case i used these: https://www.amazon.de/-/en/gp/product/B0BNNC2S75/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1 

And 2 screws for attaching to wall.

Printing:

• For the bottom cover use at least 3 walls because the 2 rods holds the whole light together.
• When slicing, stick to the foto in galery.

Assembly + installation:

• You can optionaly print the template to help find holes to drill.

1. Assembling beggins by putting and screwing the E27 light socket inside of the mount + route the cable into the mount hole at the bottom.
2. Close the bottom of the mount with bottom cover by aligning the 2 rods into the 2 holes of the mount, also when closing you will seal the cable hole so make sure the cable will not be damaged.
3. Attach the Top cover part to the top of the mount, again align 2 holes of the top cover with the 2 rods.
4. Screw the 2 nuts onto the rods so all the parts sticks together. You can optionaly print the key which helps with screwing.
5. Now you can install the E27 light source
6. Screw the light on the desired place on the wall. You can either preinstal 2 screws and then hang the light on them, or use angle wrench like this one: https://www.amazon.de/-/en/Multifunctional-Magnetic-Attachment-Adapter-Drilling/dp/B0C1P4CNQJ/ref=sr_1_3?keywords=right%2Bangle%2Bbit&qid=1704663596&sr=8-3&th=1 

Plug the cable into the outlet and test the function.

Enjoy!