Giá Treo Giấy Vệ Sinh Tic Tac Toe

Design done for the Bathroom Shelves Contest inspired by shelves you can find on Amazon as the one shown below. The only difference in my model is that the elements at the bottom are “floating”.

The shelves will work for paper roll of 95mm outer diameter, 38mm inner diameter and 95mm deep.

Until now I only print out a reduced version to test. In full scale the walls need quite a time to be print out since they measure 300mm X 100mm x 7mm. But it is easily printable with a bambu lab P1P

You will need to print :

• 4x cross.stl
• 1x wall_support.stl
• 1x lower_support.stl
• 2x vertical_panel.stl
• 1x horizontal_panel.stl