Molang và Piu Piu

Molang is a cute rabbit from a French animated childrens television series. He is soft, he is fluffy, he is Molang ^.^

UPDATE: his best friend Piu Piu is now included <3

Printing Advice

These models were designed for multi-material printing. For Molang, the included .3mf file uses extruders 1 (white), 2 (black), and 4 (pink). For Piu Piu, it uses extruders 5 (yellow), 2 (black) and 4 (pink). You may need to repaint based on your current extruders setting. In this case, use the bucket infill to paint the individual parts. I used 0.20mm (quality) and 15% infill with a brim just to be sure. Both models take roughly 1 hour on the MK3S+ MMU3.

Important: set your purging volumes to purge more filament when transitioning from dark to lighter colors. Find the Purging Volumes button on the side of the infill select box, click on advanced settings, and change the purge to a value of at least 300 like shown in the image below. If you skip this, you may get darker lines when the color changes to white.