Bảng hiệu/Mouse Pad Logo Foundation

The math foretold this models existence, it was inevitable. This is a Foundation logo sized at around 20cm wide and 3mm deep to accommodate four optional 5x2mm or 6x2mm disc magnets in the back. 

It can be used as a sign or with a non reflective plastic possibly a mouse pad. It can also be fixed to things using double sided tape or glue at your discretion instead of the optional magnets.

If you would like to view the 3D model in colour in your browser and with optional AR, this is available directly at the Shapr3D viewer here.

Printing

The normal 3MF is a direct export from Shapr3D, you will need to paint and configure this for your printer.

The Bambu 3MF has been painted, and the prime tower moved to not collide with the model. You will need to apply your preferred settings for such a model.

Magnets

The picture above shows the original design in its normal orientation without the space for the 6x2mm disc magnets. Hence the 5x2mm magnets go in these holes as pictured and the 6x2mm magnets go in the other ones.

For safety purposes I put a small amount of glue on a magnet before insertion. As the gap is tight to accommodate optionally using no glue, the easiest way to do this is to put the magnet on the back of a metal spoon, dab the glue, carefully align the magnets over the holes and apply pressure. It should pop right in.

Versions

2023.09.28: Add support for 6x2mm magnets.

2023.09.23: Original upload.