Bracket bàn đạp Moza SR-P cho Sim-Lab GT1 EVO

The Brackets are form fitting, fits the slots and holes in the base place of the rig and will not move around.

Material needed:

• M6 heated inserts 4 pieces
• M6x25 countersunk bolts 2 pieces
• M6x30 cap head bolts 2 pieces
• M6 washers

The heated inserts are loaded in compression so it's very strong. I have been racing for one month and didn't notice any flex.

Print parameters: ABS, wall thickness 4-5, infill 25% any pattern should be ok.