Vít hai chiều (Two way screw)

This is a "screw" that can thread a clockwise and counterclockwise nut. It's just satisfying to play with.

Original idea from: https://youtu.be/cDfMI5ahbJI

Some people have asked for various variations of the screw but I haven’t had time to make most of them. I uploaded a longer screw and shorter nuts which were the easiest requests to fulfill. These are untested so print at your own risk, although they should work since I just extended or shortened the original models

Print instructions

Category: Toys & Games Summary

This is a "screw" that can thread a clockwise and counterclockwise nut. It's just satisfying to play with.

Original idea from: https://youtu.be/cDfMI5ahbJI

Some people have asked for various variations of the screw but I haven’t had time to make most of them. I uploaded a longer screw and shorter nuts which were the easiest requests to fulfill. These are untested so print at your own risk, although they should work since I just extended or shortened the original models

There are lots of remixes that might be what you’re looking for so check them out!

Print Settings

Printer Brand:

MK3

Printer:

Prusa i3

**Rafts:**

No

Supports:

No

**Resolution:**

0.15

Infill:

25%

**Filament:** Prusament PLA purple