Đế IKEA EKET có chân (base with legs)

No drilling required to the EKET itself

Results may vary, but if you can't connect the legs to the bracket try sanding down the seams.

Wall line count: 3

Layer height: 0.2

Infill: Triangles @ 20% 

(5hrs++) per legs

(4hrs++) per brackets

(2hrs++) per leg caps

Use M4x20 buttonhead & nut to secure brackets together

Haven't tried it yet but you can try setting top & bottom layer thickness to 0mm and infill line multiplier to 2 for more cooler looking print.

Also to cut print time you can print with 0.28mm resolution