
Đèn 4 In a Row (4 In a Row Lamp)
- Downloads
- 21
- Likes
- 6
- Views
- 239
- Remixes
- 0
- Comments
- 0
Files 3 2.6 MB
- Connect_4_Lamp_Chip_1777746152.STLSTL · 126.6 KB
- Connect_4_Lamp_Base_1777746153.STLSTL · 1.3 MB
- Connect_4_Lamp_Top_1777746154.STLSTL · 1.2 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #367117
- Category
- Đồ Chơi Khác
- Published
Description
We decided to mash up the classic "4 in a row game" with a lamp and got this fun model! Sit with your friend and spin the lamp shade to play!
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
**Resolution:**
.2mm
Infill:
15%
**Filament:** Protopasta PLA
Notes:
-0.2mm layer height
-15-20% infill
-Supports needed for the base where the lamp will be seated
-Print the base
-I used this lamp cord:
Lamp Cord
-Print 21 red chips and 21 yellow chips
-To print with optimal clarity:
-.1mm layer height
-2 perimeters
-avoid crossing perimeters
-100% infill
-Aligned Rectilinear fill pattern
-0 top and 0 bottom layers
-Slow all speed to 20mm/s
-Print at a higher temp for PLA, I used 220 for mine
-Print on a smooth sheet or glass bed for best clarity
-I used the “print by object” setting and filled the bed with copies for the transparent filament
Category: Games
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 2.6 MB
- Largest file
- 1.3 MB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -

-

-

-

-

-

-
New

