
Mod TopHat Voron 2.4 cho CPAP và Exhaust
- Downloads
- 28
- Likes
- 11
- Views
- 862
- Remixes
- 0
- Comments
- 0
Files 5 2.4 MB
- Top_Hat_iris_vent_adaptor_1777753015.stlSTL · 525.8 KB
- Top_hat_cpap_mount_1777753016.stlSTL · 1.1 MB
- TOP_hat_Iris_to_150_duct_mount_1777753017.stlSTL · 290.7 KB
- TOP_hat_Iris150_duct_mount_1777753017.stlSTL · 140 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #366359
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Attribution
Description
You will have to print majority of the files from the links provided.
I have modified the linked models to work together on top of my voron 2.4 350mm without the need of cutting the top panel.
you could use this mod on the smaller versions of the 2.4 as the middle section for I’ve modified for cpap is the same size and can be a swap out replacement from the original design.
The intention of this mod is to be able to open and close the chamber electronically as well as have it function with presets via gcode/macros
No supports are needed.
The WS7040 mount in the supplied links used for the cpap motor also works with my mod.
While any should work, I have linked one of the WS7040 for reference.
https://www.aliexpress.com/item/1005001539694845.html
My mods are essentially making the individual design work together and to gain extra clearance on the z axis
Please let me know what you think and share your makes if you do :D
Print spec
- Formats
- stl
- Model files
- 5
- Total size
- 2.4 MB
- Largest file
- 1.1 MB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -
New -
New -
New -
New -

-

-


