Giá đỡ màn hình Waveshare 4.3 inch cho VORON V0.1

This Waveshave 4.3 inch displayholder is designed to fit perfectly onto the VORON V0.1. The skirts i used were from the VORON Trident skirt mod for the VORON V0.1. 

V0.1 Trident skirt mod:

https://github.com/Fleafa/VoronUsers/tree/V0.1-Trident-skirt/printer_mods/MCMBen/Voron0_Trident_Skirt

Used parts:

• 4x M3 threaded inserts
• 2x M2 threaded inserts
• 4x M3x10mm screws
• 2x M2x20mm screws
• 4x M2.5x6mm screws for mounting the display
• 2x M3x8mm screws for fixing the displayholder to the frame

printing the parts:

All the parts are printed in ASA or ABS with 4 outer perimeters and 40% infill. Pay attention to orient the parts to be printable!

assembling the mount:

[red] insert M3 threaded inserts into the middle parts

[orange] insert M2 threaded inserts into the left and right part

[red] Complete the assembly by screwing in the M3x10mm screws. 

Put the display on the holder and and fix it in place with the screws.

At the last step you have to put the front cover on.

If there are any questions left you can contact me. Happy printing and building!