
Bộ Sắp Xếp Phòng Tắm (Bathroom Organizer)
- Downloads
- 21
- Likes
- 5
- Views
- 298
- Remixes
- 0
- Comments
- 0
Files 2 2.6 MB
- Bathroom_organizer_1777717804.stepSTEP · 579.7 KB
- Bathroom_organizer_1777717805.objOBJ · 2 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #365236
- Category
- DIY
- Published
Description
Beard care organizer/Bathroom organizer
---Print Directions--
Supports - ON (I left square cutouts in the bottom for rubber feet *optional*Link below)
Brim - I would (Up to your machine)
Nozzle Temp- Depends on filament (I used Overture PETG at 240c)
Bed Temp- Depends on filament (I used Overture PETG at 80c)
Extra Bed Adhesion- I used hairspray- I will be trying glue sticks moving forward for PETG (The purple sticks)
---Notes---
I did get some curling on the corners I would recommend using a brim, but you know your machine better than I do.
Rubber Feet Cutouts- leave supports on- After cleaning these out they should fit the rubber feet linked below
Rubber Feet- https://www.amazon.com/dp/B085DMB1XV?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Beard Wax Tin Storage Metal Dowels - I left 3/16 sized holes around the tin storage location- These are intended for 4 dowels- The intention is to apply a small bit of glue to the hole heat the dowels and slide them in. I am waiting for these to arrive. If this doesn't work I will update this model- You can use whatever metal you prefer- I am going with brass. Copper, Bronze, Stainless steel would also be cool alternatives.
Brass Dowels- https://www.amazon.com/dp/B09TDCB7FT?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Print spec
- Formats
- objstep
- Model files
- 2
- Total size
- 2.6 MB
- Largest file
- 2 MB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -

-

-

-

-

-

-


