Skip to main content
F3D
Capsule Crew Dragon của Spacex với thiết kế mở nắp 1

4 images

Miniatures

Capsule Crew Dragon của Spacex với thiết kế mở nắp

By niklasschoet_1070035

Downloads
348
Likes
44
Views
1,740
Comments
3

Files 6 14.2 MB

  • Dragon_Main_Body_1766534302.stlSTL · 7 MB
  • Dragon_Latch_ring_1766534303.stlSTL · 1,012.3 KB
  • Dragon_Nosecone_1766534305.stlSTL · 3.1 MB
  • Dragon_heatsheald_1766534306.stlSTL · 2.9 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Print Settings

  • scale 100%+ for full detail
  • 0.4mm nozzle
  • 0.1 - 0.2mm Layer height
  • no supports (if necessary add supports under engine pods)

Assembly

The heatshield and the latch ring can simply be glued in place with superglue.

The hinge can be assembled using some ~1mm wire (refer to the pictures). When correcly assembled, the nosecone should close flush around the docking mechanism and open up to ~180° when fully opened (the picture shows the nosecone roughly halfway opened).

Notes

A lot of the parts of this model are quite fragile as they are designed to look scale. This means that the hinge is not particularly sturdy. The posts holding up the soft capture ring also have a tendency to break off, so do make sure to glue the ring on all three posts to add some stability.

Have fun printing!

If you want to support what I'm doing, you can buy me a coffee. I appreciate it!

Read more Show less

Print spec

Formats
stl
Model files
6
Total size
14.2 MB
Largest file
7 MB

3 comments

See all