Skip to main content
F3D
Adapter eyepiece 1.25" cho Tasco 11TE-5 (vặn ren) 1

1 image

Giáo Dục

Adapter eyepiece 1.25" cho Tasco 11TE-5 (vặn ren)

By Matelier

Downloads
25
Likes
2
Views
191

Files 1 1.5 MB

  • TelescopeAdapter_1777706188.stlSTL · 1.5 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

No modifications are required on the telescope. It adds minimal focus distance so it's possible to focus to infinity with most eyepieces.

BOM

  • 2 M3x5x4 heat set inserts
  • 2 M3x10 socket head screws

Instructions

  • Print without support with 0.1mm layers. You really need 0.1mm layers because the threads are very fine. You can use a brim if your bed adherence is low.
  • Install the heat set inserts in the side holes.
  • Insert the screws in the heat set inserts.
  • Unscrew the original eyepiece holder (the black ring at the top of the focuser tube with two screws).
  • Screw the new one and enjoy!

CAD Source

You can find the OnShape CAD source here:

https://cad.onshape.com/documents/792d7f1f60cb243d59a0d4ee/w/b62c9960f47c199d89b3457c/e/7a7f30a3956bcd50a06b39fc?renderMode=0&uiState=6765a570683b973ce726d565

Read more Show less

Print spec

Formats
stl
Model files
1
Total size
1.5 MB
Largest file
1.5 MB

0 comments

See all