
Nắp Focus GL4 IRH (GL4 IRH Focus Cap)
- Downloads
- 12
- Likes
- 3
- Views
- 73
- Remixes
- 0
- Comments
- 0
Files 1 458 KB
- GL4_PRO_IRH_focus_cap_v4_1777685519.stlSTL · 458 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #361864
- Category
- DIY
- Published
- License
- Creative Commons — Public Domain
Description
GL4 IRH Focus Cap for 21.8mmx8mm flat convex lens. WORKING PROTOYPE that may require light sanding/resizing to fit, do not force anything. This is a 2 piece friction fit design.
For assembly, I recommend sandwiching the lens into the adapter tube with cap (there is a very small gap between adapter and cap) before pressing the whole assembly onto the light head. This ensures the lens is flat against the light head, I messed with offset and found that with the lens I used no offset was best. Some tape or glue will keep the cap from dislodging and the lens coming loose. There are multiple caps with different sized openings to further reduce spill.
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 458 KB
- Largest file
- 458 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-

-

-
New -

-

-

-

