Kệ Góc Bồn Rửa (Corner Sink Organizer)

Really easy to print and assemble, this corner sink organizer is the way to go to organize and dry your sink utensil. 

With a bottom incline to make water drip from its center into the sink. 

Every thing can be printed easily with some tips:

• the sides must be printed standing up with a little brim on the outside
• all the corner printed laying down on the back so there's no need for support
• layer high for the corners 0.2 or 0.28; for the sides 0.28 the ones on the back, the front one can be printed at higher resolution for the pattern to be more precise. I personally printed everything at 0.28. 
• the bottom piece should be printed at 0.2 or lower the get the water to follow the right path.

To be Printed:

• base
• front piece
• 2x back piece
• all three types of corner

I strongly suggest PETG for corners and bottom, the sides can be printed with PLA or PETG. 

For a more special look I use plexiglass for the back sides. That's what shown in the photos. I printed everything on my Elegoo Neptune 4pro.