VFA Test Core One 0.6mm Nozzle

I recreated the VFA test model from scratch to increase the wall thickness to 1mm for printing with a 0.6mm nozzle, and I've included the STEP file so others can easily adapt the model to their setup.

Note that I've left the angle text off since that increases print time. For reference, they are 0° (X-axis), 30°, 45°, 60°, and 90° (Y-axis).

The 3MF file includes the M220 gcode commands to vary the speed in 10mm/s increments every 5mm of z-height from 40mm/s to 200mm/s. Just slice and print.