Giá treo tường HomePod Mini

I made this so I could mount a HomePod mini to the wall in my daughters bathroom.

It can be mounted using either 2x 3M adhesive strips or screws. I've personally used the 3M strips.

When printing be sure to enable supports on the back plate. The main body should not need supports. I printed everything using the orientation in the 3MF & STL files.

The back sits flat against the body with no bulging if the cord is coiled flat, this is an important step and can be seen one of my photos. It is a bit fiddly to do, but I think not a big deal as it's a once off. I left 40cm of cord hanging from the bottom to plug it in.

This requires 6x M3x8 screws to assemble. The bottom 2 screws can be replaced with 30mm screws (which is what I've done).