Skip to main content
F3D
HSW interface blocks – Khối interface nối HSW grid với vật… 1

5 images

DIY

HSW interface blocks – Khối interface nối HSW grid với vật in

Remix of Tường lưu trữ Honeycomb By RostaP

By DennisP

Downloads
70
Likes
16
Views
611
Remixes
1

Files 7 5.3 MB

  • test_print_1777660260.stlSTL · 203.9 KB
  • HWS_interface_block_default_1777660261.stlSTL · 1.7 MB
  • HWS_interface_block_tight_fit_V2_1777660263.stlSTL · 2 MB
  • HWS_interface_block_default_1777660265.stepSTEP · 324.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

Summary

These interface blocks can be used as in insert in your printed object making a secure connection between it and the HSW grid.

Where i already used these blocks:

This block enables support free printing! While keeping a rigid connection. These blocks can be pressed in a pocked and should be secure enough without any glue!

It's also designed to be easily removed thanks to this rib so it can be pulled out with pliers!

Versions

There are as of now, 2 version:

  • default
    • Here the connection to the HSW grid is the same as the original
      • i find these to be a bit loose
  • Tight fit
    • Offset on HSW connection, enables a more rigid connection to HSW grid
    • connection to printed object remains the same

Design

The pocket in your design should look like this. I also included a test print for this (F360 file also included).

Read more Show less

Print spec

Formats
f3dstepstl
Model files
7
Total size
5.3 MB
Largest file
2 MB

0 comments

See all