Giá đỡ laptop dựng đứng có chỉnh độ rộng, có thể tăng trọng (Weighted)

I printed out the Rift laptop stand and liked it but wished it was heavier. So I modeled up an adjustable laptop stand that can be filled with whatever you want, I chose lead shot because it was much heavier than sand or concrete and nearly 50% heavier than steel.

The adjustment range is from roughly 14-31 mm

BOM

-4x m3x16 screws

-1x m3x8 screws(for middle)

-5x m3x6 or m3x8 heat inserts

I printed the final in PTEG for extra impact and heat resistance just in case but PLA would work as well. I also used epoxy as I poured in the lead shot just in case it cracked, there wouldn't be a sea of lead shot everywhere.

5 walls and 40% gyroid infill PETG

After adding lead shot and epoxy, the total weight was ~3.6lbs.