Đèn #30 - Lồng chim (Lamp # 30 - Birdcage)

A printed birdcage lamp cage, simple shade and its own base for an e14 socket and bulb.

With the base, the lamp is 180 mm height and 120 mm wide.

The base is attached to the birdcage using 3 M3 by 10 screws and 3 brass inserts.

No supports required.

The fassung-lamp socket ( e14-28 mm):
     https://www.amazon.de/dp/B097K4YNL9

The electrical cable and switch:
     https://www.amazon.de/dp/B002DAOX58

The E14 Bulb used here:

      https://www.ikea.com/de/de/p/solhetta-led-leuchtmittel-e14-250-lm-kerzenfoermig-opalweiss-30498748/

3 x M3 by 10 Screws

    https://de.aliexpress.com/item/32443118299.html?

3 x M3 Inserts

    https://www.amazon.de/dp/B08BCRZZS3?

The slicer settings for the base and the birdcage:

.20 mm Standard and 

(All standard settings and speeds, Random seam settings

Filament:  Eryone PLA+ Matte Black

The shade itself was printed using a white PLA.. 

     Sunlu PLA+ White

The slicer settings:

.16 mm High Quality and Generic PLA
Infill %  - 30 , Gyroid
Wall Loops - 8
Top Shell - 8
Bottom Shell - 6
Outer Wall Speed - 60 mm/s
Inner Wall - 150 mm/s

Seam Position- Aligned