
Khối căn chỉnh PETG Tungsten 75%
- Downloads
- 240
- Likes
- 18
- Views
- 3,707
- Remixes
- 0
- Comments
- 0
Files 3 516.4 KB
- Calibration_Block_v2_1777634429.gcodeGCODE · 217.8 KB
- Calibration_Block_MK4_0.4n_8m_1777634430.bgcodeBGCODE · 149.2 KB
- Calibration_Block_XL_0.4n_8m_1777634430.bgcodeBGCODE · 149.4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #357988
- Category
- Máy In 3D
- Published
Description
Calibrate your printer before printing large parts! For this, we designed this calibration block that should weigh at least 5.4g, when printed. We recommend printing it and weighing it before you start creating large, heavy and expansive parts. This way you can find out whether your printer is in the best condition that is necessary for successful printing with Prusament PETG Tungsten 75%. If you see any flaws on the block or find that the weight is significantly lower than 5.4g, clean your printer thoroughly and repeat the process.
We only offer g-code. This is because the print settings cannot be changed to maintain the correct calibration block values.
You can change the print speed on the printer.
Print spec
- Formats
- bgcodegcode
- Model files
- 3
- Total size
- 516.4 KB
- Largest file
- 217.8 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -
New -

-

-
New -

-

-

-


