SPEED BOAT | Scalable – Thuyền cao tốc có thể scale

SPEED BOAT | Scalable

This was a special request from my little girls: a speedboat for their barbies.

So here it is! It can be scaled to any size.
The original size has a length of 390mm, which can take about 5h to print.
But I also printed it at 50% scale a couple of times, so my kids would all have one, and then for my kids' friends who started asking for one as well.

So if you print one, be ready to have to print many more for the entire neighbourhood...

DIMENSIONS | W 150mm x L 390mm x H 98 mm

Printing | ~5h

3D PRINTING SETTINGS

Resolution: 0.2mm / layer or less
(the finer the resolution, the more watertight!)
Build adhesion type: ~5mm Brim
Infill Density: min. 5% (Gyroid)
Supports: None

The boat was designed to be printed on the back face, as shown on the CURA shots in attachment.
It's recommended to add some adhesion, like a 5mm brim or so, to make sure it doens't move during printing.