
DIY
Kẹp Lưỡi Gạt Mưa Kính (Hook Type) – Windshield Wiper Blade Clip
- Downloads
- 333
- Likes
- 20
- Views
- 1,571
- Remixes
- 0
- Comments
- 0
Files 1 10.4 MB
- wiperclip_1777581677.stlSTL · 10.4 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #356177
- Category
- DIY
- Published
Description
Fitment:
This part is for conventional wiper blades and hook type wiper arms (refer to diagrams):
Printing:
Material
PETG or better (needs to withstand outdoor conditions and heat)
Nozzle
0.4mm
Layer Height
0.2mm
Infill Density
100%
Infill Pattern
Concentric
Support
Yes
Orientation
Large flat side on build plate
Installation:
- If you have not removed the wiper blade already, do so, being careful to not slap the windshield with the metal wiper arm and crack it. The old clip should pop off of the wiper blade with a little force.
- Pop the new part onto the little bar. Look at your other wiper if you're concerned about the orientation.
- Push the wiper arm hook through the slot in the blade and pull the wiper until the part clicks into the hook.
If you need to make changes, here is the onshape model.
Like and comment if this helped you out!
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 10.4 MB
- Largest file
- 10.4 MB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-

-

-

-
New -

-

-


