Lưới cho ổ đẻ Omlet Eglu Mk2

Thank you for supporting me!

This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a small Donation or Buy me a Coffee. Thank you!

Design

For the latest design, please visit https://www.printables.com/model/140942-grid-for-omlet-eglu-mk2-v2

Modular system that allows the creation of short and long grids. For the shortest version, combine End and Start parts, or use the special Short parts. For longer grids, add multiple Middle parts.

As alternatives for End and Start, EndWithExtend and StartWithExtend are provided. They allow you to keep the metal mounts for the vertical wall in place and fill the gap at the end / start. The photos show the standard End and Start without extend.

Common configurations:

1. Standard:grid covering roughly two thirds of the length and placed next to the chicken entry door: EndExtendLeft/Right + StartLeft/Right + 2 x Middle + 16 x Connector
2. Short: grid covering the rest: ShortLeft/Right + 5 x Connector
3. Full: grid covering the full length:  EndExtendLeft/Right + StartExtendLeft/Right + 4 x Middle + 25 x Connector

Print in PETG for durability. We used 0.4mm nozzle and 0.2mm layer height. No support required. Flip all parts to lay on the upper flat side (see .3mf PrusaSlicer files included).

Use the connectors and glue all parts together.