Hộp Gara Tham Số (Parametric Garage Boxes)

Hi!

This is a box customizer with a roller door just like a garage.

Youonly need to set the width, height and depth of the box and get the files ready to print.

The door has been designed with tolerances in joints buti recommend doing a first test with the 'test.stl' file, a small piece used for calibration.

The door parts can be dissasembled and/or reconnect with others so you can combine different colors in one door or reusing parts for other boxes.

Also included the STL's for the three parts of a 105x105x105 cube box.

Hope you find it useful!

Have fun!

Print Settings

Printer:

BQ Prusa i3 Hephestos

Rafts:

No

Supports:

No

Notes:

I used 0.3mm resolution for the box, just to save time.

For the door i reccomend 0.15 or 0.2 resolution.

About the Customizer

Customizer parameters

Files generated

Disassembling doors

Flex and pull carefully

Combine parts

Make multicolor doors

How to assemble

You need this three parts: box+doorframe

Roll the door over the guides (you may sand the box guides for a smoother roll)

Push the frame.

For stacking many boxes, this is my best solution. It works :)

Category: Containers