
Thùng rác mini gắn tường kiểu rãnh chữ V
- Downloads
- 72
- Likes
- 9
- Views
- 304
- Remixes
- 0
- Comments
- 5
Files 3 629.3 KB
- Trashcan_-_140mm_x_60mm_1766270349.stlSTL · 596.8 KB
- Wall_Plate_-_6mm_Holes_1766270350.stlSTL · 31.1 KB
- Wall_Plate_-_Blank_1766270350.stlSTL · 1.4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #35596
- Category
- DIY
- Published
Description
General
I wanted a small container to mount near my printer for purge lines, brims and other small bits of trash. I found several options but as always didn't find exactly what I was picturing so I designed this with a couple goals in mind.
- Print easily and quickly without any complex geometries or supports
- Be easily removable from the wall to facilitate easy emptying
I settled on a dovetail wedge style design which works well to securely hold the container when its mounted but easily slides upwards to remove it and empty it.
Mounting Hardware
I sized the 6mm holes to fit some short coarse thread drywall screws I had laying around but you could also mount it with 3m command strips etc. I also included a wall bracket file with no screw holes so that you can modify it to your mounting needs more easily.
Printing
I printed mine in Prusament Chalky Blue PETG with a 0.4nozzle using the input shaper speed 0.2mm layer profile. I recommend a brim on the wall mount due to how thin it is. No supports are needed and all files should already be oriented on the bed as needed.
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 629.3 KB
- Largest file
- 596.8 KB
5 comments
You may also like 12 models
See all-
New -

-

-

-

-

-

-

-

-

-

-


