Giá treo tường Wakeboard/Snowboard

If you print a Rocker hook then the second hook must be mirrored.

• Resolution:   0.2 mm

• Wall loops:   5° hook 5-loops       /  30° hook 10-loops  

• Infill:             5° hook 20% /   30° hook ~40%  but more is better

• Material:      PLA ,  PETG

• Supports:    No

• Brim            No

Screw hole

• Diameter :  5.2mm,   0.2 inch

Hole Length :

•  Hook D1  -  28mm,   1.10 inch

• Hook D2  -  25mm,   0.98 inch

• Hook D3  -  15mm,    0.59 inch

• Hook D4  -  13mm,    0.51 inch