Kẹp giữ thẻ (Badge Holder) ngang

This model can hold only one card, in horizontal display.

I designed it for fast-printing and light weigth.

Please remember to turn it to lay on its back before slicing. 

Material: Whatever (PLA, PETG, ABS…) It might even work with TPU but didn't test it.

Resolution: 0.2mm

Perimeters: 3 walls, 3 top 3 down.

Infill - Doesn't matter.

Supports: It has 90º overhands and was designed with holes under those in order to ease creating supports directly on the bed. HOWEVER: If your machine has a really great part cooling, you might want to give it a try since the overhands are not to big, and any defects could be trimmed/sanded afterwards.