Bộ Light Gridfinity Bins (Magnet Corner Only)

Collection of Light Gridfinity cups with magnet corner attachments. The Efficient floor reduces the plastic used, and print time, however the bin floor is not flat. There are magnets holes (no screw holes) in the bin corners, these have small caps on them, and dont raise the height of the floor. The attachments are only on the corners with greatly improves print time and plastic used.

Generated using my Gridfinity Extended OpenSCAD script. I have generated STLs for bins of all common configurations (over 2500 configurations per height).  The OpenSCAD script is quite flexible and all configurations can't be included here. If what you need is not here please make a suggestion, or check the OpenSCAD script.

Options included:

• Height: [2, 2.5, 3-37] (in 7mm units)
• Widths: [0.5, 1, 2, 3, 4, 5, 6] (in 42mm units)
• Depths: [1, 2, 3, 4, 5, 6] (in 42mm units)
• HalfPitch: off
• EfficientFloor: on
• Attachment points: Corners only
  • MagnetDiameter = 6.5
  • ScrewDepth = 0