Skip to main content
F3D
Dao OTF Fidget Độ Tin Cậy Cao… 1

6 images

Đồ Chơi Khác

Dao OTF Fidget Độ Tin Cậy Cao (High Reliability Fidget OTF Knife)

Remix of Mô hình dao xếp tự động (OTF Knife) - Dự án in 3D giải trí độc đáo By kyle_1241030

By Mike2121_307623

Downloads
329
Likes
33
Views
3,185

Files 5 1.2 MB

  • OTF_Fidget_Knife_base_1777542269.stlSTL · 372.4 KB
  • OTF_Fidget_Knife_top_1777542270.stlSTL · 280.8 KB
  • OTF_Fidget_Knife_slide_1777542272.stlSTL · 41.1 KB
  • OTF_Fidget_Knife_spring_1777542272.stlSTL · 10.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

The changes I made to kyle's THA otf knife was the shape of the thumb actuator, and I added a snap-in ledge to top and bottom, so that it would stay closed without screws or glue.

The key to the reliability is:

1. Printing the spring and slide in ABS, this gives the knife better stability, as ABS is less likely to change shape with use, as PLA does. I noticed the slide distorts under pressure, so ABS is better able to resist that distortion, as that distortion makes the slide rub against the blade 

2. I printed the top and bottom with all top surfaces ironed for smoothness, as this affects reliability

3. I printed the blade and slide on a smooth PEI bed, again for smoothness

4. The rubber band only needs to be light band (I used a rubber band from a bunch of asparagus)

5. The snap-in ledge improved kyle's THA otf knife, as it kept the top and bottom closed, kyles knife the top and bottom separate with use

Note:

1. If the blade does not catch every time, try bending the spring slightly to increase catch tension 

2. lightly lubing the blade and slide may help also 

Printing details:

  • Printed on Bambu Lab X1 Carbon
  • Printed on smooth and textured PEI bed
  • Used generic ABS and PLA
  • Printed parts with 3mm brim for better bed adhesion (parts must be dead flat)
  • Printed with brim-object gap of 0.18, for ease of removal
  • Printed all top surfaces with ironing
  • Top and bottom were printed on textured side for aesthetics
  • Blade, spring and slide were printed on smooth side to minimise friction

Read more Show less

Print spec

Formats
stl
Model files
5
Total size
1.2 MB
Largest file
488.9 KB

0 comments

See all