
Đồ Gia Dụng
Giá đỡ bánh sinh nhật có thể thay đổi trang trí
- Downloads
- 50
- Likes
- 24
- Views
- 639
- Remixes
- 0
- Comments
- 0
Files 9 5.4 MB
- Cake_Stand_3_Part_-_Base_1765625224.stlSTL · 947.1 KB
- Cake_Stand_3_Part_-_Plate_1765625225.stlSTL · 869.3 KB
- Cake_Stand_3_Part_-_Skirt_1765625225.stlSTL · 70.2 KB
- Decor-Ears_1765625226.stlSTL · 571.4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #35461
- Category
- Đồ Gia Dụng
- Published
Description
Printed with eSun PLA+ (Black, Yellow, and Fire Engine Red),
The Stand:
Printed in 3 parts with the base and plate screwing together, and the skirt concealing the decor connectors.
- Base - printed without supports, .20 mm, 20% infill (supports may be needed depending on your printer - I'm pushing the limits with mine I think)
- Plate - printed upside-down without supports, .20 mm, 20% infill
- Skirt - printed upside-down without supports, .20 mm, 15% infill
Decor:
- Buttons: printed in two parts, buttons and posts, without supports, .20 mm, 20% infill (will be glued together)
- Buttons V2: 2 color print version to better match style of feet (black ‘outline’ on bottom, with yellow button top). Added 4-Oct-2023.
- Clips: printed on side, no supports, .20 mm, 100% infill
- Cartoon Feet: printed without supports, 20% infill, two versions:
- Joined: If you will not be using different color filaments, and/or wish to paint with no glue needed
- Separated: shoe are printed separately (handy for color change or painting), then glued to backing with legs.
- Ears: printed brim down, with supports for the ears and dome, .20 mm, 20% infill
Additional Supplies needed:
- Superglue (or your preferred glue choice for PLA) for the buttons and if using separated feet.
- File or Sandpaper (if button posts do not print cleanly)
- Resin (if you want to have a nice smooth/glossy finish or seal it after painting) - ArtResin is Certified FoodSafe (I mixed in a condiment cup, and brushed on with a disposable sponge brush using about 1/2 condiment cup worth (1 ounce total.. give or take) of 2 part mixed resin to cover feet, buttons and ears.. it doesn't take much!)
Other decor sets will eventually be created and added, by myself and hopefully others. The Stand_Connector file is up for any who wish to make their own decor items.
Print spec
- Formats
- stl
- Model files
- 9
- Total size
- 5.4 MB
- Largest file
- 1.3 MB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-
New -

-

-

-
New -

-


