Skip to main content
F3D
Chó robot Spot (Gần như) print in place 1

3 images

Figures & Action Figures

Chó robot Spot (Gần như) print in place

By JMV38_1430123

Downloads
760
Likes
94
Views
2,907

Files 3 3.9 MB

  • dog-v41_1777515921.stlSTL · 2.8 MB
  • screws_1777515922.stlSTL · 429 KB
  • dog-v41_1777515923.3mf3MF · 761.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#353743
Published

Description

My take at making the famous robot dog Spot.

Uses my gen#4 ball joint design. Gen#4 is gen#3 plus a small plate covering one side of the hinge, making it more discreete. You may have to unstuck it with a little twist of screwdriver between the ball and the plate.

I chose to print the screws separately because, although they could be printed in place with the model, the print is more reliable when printed separately.

Print it with 0.2 layer (it is designed for it) and 0.4 noozzle. No support, no brim, except for the screws. Print, remove buil in supports below the ball joints, move the parts until fluid. Then screw the screws in to tighten the model. Dont overtight.

I have shared a 3mf file which is my bambu slicer project with colors and settings. Painting is a bit tedious, but it is very important for this model. Keep purge volumes at 100%, be cause yellow is very sensitive to black contamination, and turns ugly if contaminated. 4h30 print in 2 colors.

if you want the stl files, they are also here.

PLEASE LIKE, COMMENT, POST PICTURES OF YOU MAKES! I love to read your feedback!

Category: Toy & Game Accessories

Read more Show less

Print spec

Formats
3mfstl
Model files
3
Total size
3.9 MB
Largest file
2.8 MB

0 comments

See all