Jawa 500FL 1:10 – Ed van der Heijden

By EdvdHeijden_623138

Downloads: 411
Likes: 87
Views: 1,401
Remixes: 0
Comments: 0

Download all (.zip)· 38 files · 11.2 MB· 11.2 MB

Files 38 11.2 MB

Jawa_FL_accu_1777503941.stlSTL · 68.1 KB
Jawa_FL_Glas_1777503941.stlSTL · 76.3 KB
Jawa_FL_Benzinedop_1777503942.stlSTL · 113.4 KB
Jawa_FL_Remtrommel_1777503944.stlSTL · 37.8 KB
Jawa_FL_achterlicht_1777503944.stlSTL · 193.3 KB
Jawa_FL_Carburateur_1777503946.stlSTL · 334.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #353277
Category: Miniatures
Published: 04/30/2026
License: Creative Commons — Attribution — Noncommercial — Share Alike

Description

Supports: Yes

Resolution: Dynamic

Infill: 50% line

Filament brand: 195

Filament material: PLA

Rems do not use Supports!!

only rems: Speed 60mm/s

3 bolts m2 x 20mm

2bolts m2 x 6mm

With the cooperation of @mochr, I have given the Jawa 500FL a major upgrade.

The two rims have gone to a higher print level.

The rim file was 60 MB and you had to print support and wait to see if everything remained intact. Now this is a thing of the past, because I have developed a rim that no longer requires support and comes off the printer smoothly.

Two bolts have also been added to the front and rear wheels, so that they can now rotate properly. I have also added a number of files so that I can print out the fenders. These were not included in the original files. Of course I made the stand much better because it was very unstable. This is an important part to ensure that the motorcycle is stable.

The stat boards front and rear could not be printed with the nozzle 0.4. That's why I also designed other mudguards for this. I would like to thank @mochr for his beautiful design, which I really appreciate.