Skip to main content
F3D
Đèn Lithopane kèm các tấm lithopane và đế lưu trữ 1

3 images

Đồ Gia Dụng

Đèn Lithopane kèm các tấm lithopane và đế lưu trữ

By ClassicAdam

Downloads
275
Likes
50
Views
1,535

Files 9 150.6 MB

  • lithopane_lamp_storage_base_1777495626.stlSTL · 8.5 KB
  • lithopane_lamp_base_1777495627.stlSTL · 15.1 KB
  • lithopane_lamp_top_1777495628.stlSTL · 7.5 KB
  • lithopane_cityscape_1777495628.stlSTL · 25.1 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is a simple Lithopane Lamp with a few sample lithopanes, and a base that can store more.

To fit this lamp, lithopanes should be printed at 12cm x 12cm, with a thickness of less than 3mm, but I recommend 2.4 or 2.6mm.

The storage base can store about 8 lithopanes.  The lamp can be printed without the base, if it's not needed or wanted.

You will need a light to put in the lamp.  I do not recommend candles.  Try an LED light. :)

I had success printing these without supports.  I did a 10% infill.  Lithopanes are with 100% infill and recommend white PLA.

Read more Show less

Print spec

Formats
stl
Model files
9
Total size
150.6 MB
Largest file
25.1 MB

0 comments

See all