Xe ủi vàng có chuyển động (Version 2)

Upgrades From Version 1

1. The body panels with grey colors can be now printed seperately and then joined with main body thus the distinct color combination can be achieved without painting.
2. The back panel engine cover is now operated with a hinge mechanism, earlier it was take off type. There is also a lever to hold the tilt position of panel.
3. Interference issues have been rectified.
4. Changes to wheels to increase printing efficiency.
5. Better labelling for screw holes.
6. I recommend to print a engine model and place it inside the engine room so that it is visible when the engine cover latch is opened.

There are three ways to print this.

1. As single piece:- Please download STL file but there wont be any movements.
2. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf.BEST QUALITY OUTPUT. Please use the 3mf file for assembly also. CHECK EASE OF PRINTING TITLE BELOW
3. Combined:- You may use any 3D viewer software like 3D builder in windows to merge components according to your printer and filaments. The sky is the limit for this. You may find a sample file ending with combined.3mf.

EASE OF PRINTING

This model contains parts of 3 colours - GREY, YELLOW & BLACK. I have seperated these into different plates according to colour and in the optimum print position. Please download the folder “Print Plates According to Colour” to make use of them. These plates can be opened in any slicer and printed according to your print profiles.

Both the Back Wheels have been made hollow to ensure efficient printing. Makers have the option to either go for hollow wheels for all the sides or go with the solid ones(both front wheels) or a combination of both.

Supports should be provided as required.

Appreciate the makes uploads.Open for suggestions.

Category: Vehicles