Rổ Đựng Trái Cây (Fruit Basket)

All of our fruit baskets were a little small so I made this one to take over from a few other smaller ones. Some parts are a bit long and might need to be diagonal on smaller printers, but they are easy to print if you can fit them on your bed.

It should fit together easily without forcing- if it's tight you probably have the part backwards. You need two of the base, 1 of the central member, and two each of the other members. It really needs to have the joints glued to stay together. It's easiest to first assemble it without glue, then take out each piece one at a time and glue them down individually.

Printed with 0.6mm nozzle and 0.2mm layers. 2 perimeters, 5 top/bottom layers, and 20% gyroid infill but lots of those parameters could be changed.