Nút bịt lỗ cho Junction Box kèm gasket (Bruno Germany)

With this plug (TPU material) you can close unused openings from my junction box.

This 8 by 8 by 5 cm junction boxes from “Bruno Germany”  (for antenna and speaker cables) features two or three inputs and can be securely attached to a surface using up to four screws. 

You can print the plug also with PLA or PETG. No support material is used. Please do not use too much infill. The models were created using Fusion 360.

If you print and use this model, please observe the relevant regulations in you country. Illustrative model (not for power cables). Use at your own risk.