
Ngàm nối kệ sách IKEA Billy (IKEA Billy Bookcase Joiner)
- Downloads
- 292
- Likes
- 75
- Views
- 3,585
- Remixes
- 0
- Comments
- 0
Files 1 52.7 KB
- IKEA_Billy_Joiner_v4_1777408044.stlSTL · 52.7 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #349626
- Category
- Đồ Gia Dụng
- Published
- License
- Creative Commons — Attribution
Description
I put four of IKEA's “Billy” bookshelves in a room and found them to stand slightly unevenly, probably due to the uneven floor. Like every problem I encounter nowadays, there was a way to 3D print a solution! This little bracket did the trick. Find four little screws and you're in business. I recommend printing this at 100% infill, but I did my example at 10% and it felt surprisingly strong even when screwed in place. I used PLA and have no concerns about warping since the room is almost always pretty cool.
If you want a version of this that's longer than the 8cm or whatever I ended up making this, you can simply put two into your slicer and line them up perfectly end-to-end to produce one that's double the length.
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 52.7 KB
- Largest file
- 52.7 KB
0 comments
You may also like 12 models
See all-

-

-
New -

-

-

-

-

-

-
New -

-


