Shockbottle Hundo Case Gauge Filler remix

Many thanks to VP-MFG for providing the original design files. My friends and I were having issues printing this with supports, so I modified the files to have it print in two parts. Material selection and layer height are up to your preference; here's what worked for me:

• Printed on Prusa MK3S+ w/ Satin spring sheet, 0.4mm Revo nozzle
• Polymaker ASA (not necessary, PLA or PETG should work fine)
• 0.3 mm layer height (PrusaSlicer default 0.3 Draft preset used)
• 10% infill

I used ASA because I didn't want to change filament. It should work fine with PLA or PETG. I used 0.3mm layer heights to print it as quickly as possible. Adjust to the level of detail you want and speed at which you want to print. 

BOM:
4x M3 x 10 FHS

4x M3 x 4mm OD x 5mm L Heat Set Inserts (What I used: https://www.amazon.com/gp/product/B09MCWTBCC)