
Khung ảnh abstract kèm chân đỡ (10 x 15 cm)
- Downloads
- 1,770
- Likes
- 349
- Views
- 5,893
- Remixes
- 1
- Comments
- 0
Files 4 13.7 MB
- Abstract_picture_frame_Frame_v2.3_1777375439.stlSTL · 7 MB
- Abstract_picture_frame_Backplate_v2.3_1777375440.stlSTL · 3.2 MB
- Abstract_picture_frame_Backplate_v2.3_pattern_1777375442.stlSTL · 3.3 MB
- Abstract_picture_frame_Stand_v2.3_1777375443.stlSTL · 182.2 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #348422
- Category
- Mỹ Thuật
- Published
Description
An abstract picture frame, inspired by the sound-guiding wall cladding of the Elbphilharmonie main concert hall in Hamburg (Germany), also dubbed “weiße Haut” / "white skin". The frame's front side makes full use of the 3D printers' capability and is composed of an abstract grouping of small dips and valleys, which all absorb & reflect light differently and create an interesting pattern of shadows.
The frame comes with a detachable stand and holes for wall mounting. The optional stand as well as the mounting holes both work in portrait and landscape orientation. It is designed for pictures of 10 x 15 cm in size without a glass in front (although a thin layer of 0.75 mm polycarbonate should fit).
Print Settings
All parts:
- Line width 0.42 mm
- Infill 25 - 40%
- 3 - 4 bottom layers
- 4 top layers
- 3 - 4 wall lines
Frame:
- Layer height 0.12 - 0.2 mm
- Supports and support interfaces enabled (regular supports recommended)
- Minimum wall flow 20 - 25%
- "Fill gaps between walls" enabled
- The topmost layer is tricky to print perfectly (that is, without a couple of tiny holes). "Fill gaps between walls" helps. It might also be useful to reduce the line width a bit, or to print this part using a 0.3 mm nozzle. Either way, it will be functionally perfect without these tweaks, but might look better with them.
Backplate:
- Layer height 0.2 mm
- Supports not required
Stand:
- Layer height 0.16 - 0.2 mm
- Supports and support interfaces enabled (tree supports recommended)
- If tree supports do not work for you, or your slicer doesn't offer them, you may try tilting the stand 15° forward for printing. This way, the front face will be exactly vertical and allow for regular supports to reach the peg & clip in the center.
Approximate print times: Frame 6:00 h / Backplate 3:30 h / Stand 1:00 h
Print spec
- Formats
- stl
- Model files
- 4
- Total size
- 13.7 MB
- Largest file
- 7 MB
0 comments
You may also like 12 models
See all-
New -
New -

-

-

-

-
New -

-

-

-

-



