Khay đựng bài Uno (Uno card caddy)

Uno card caddy. Keep the discard pile tidy. No more forgetting which direction the action is going. Wrap with a rubber band to store cards when not in use.

Update Feb2022: Optional dealer dial. We are getting old and our brains don't work like they used to. Five people can't remember who dealt the last hand [the weed is not helping]. Glue/screw the mount on and pop in the dial.

What you need for the full experience:

1 X 688 bearing 8x16x5mm

3 X magnets 9x1.5mm

4 X stem bumpers

superglue/epoxy

Cementall/plaster of paris

Print Settings

Supports:  Yes

Resolution: .2

set wall count to 15 so everything prints solid

create "pause at layer" gcode to insert the magnets in the caddy and arrow. Use a sharpie to mark correct polarity.

Only the arrow needs a little support.

Post-Printing

Insert the stem bumpers into the base

Mix up Cementall/plaster of paris and pour into the upside down base.

Glue the 2 filler pieces in the arrow

Glue the bearing to the base

Glue the arrow in the bearing